Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other
$12.99
- Designed to fit most lightweight, midweight, and cruiser bicycles
- Fits frames with welded-on mounting plates
- Made in the U.S.A.
$13.99
This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.
$14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork.
- Fits Fork Stanchion size 32-36mm
- Fits forks up to 180mm in travel
- Weight: 31 grams (pair)
$14.99 - $26.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 64mm wide x 305mm long
- 3 Extenders included for desired protection
$14.99
Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement.
- Made in Germany
- 11890 Nuts and bolts are black finish
- 11891 Nuts and bolts are silver finish
$15.00
Sip your morning coffee out of this Q-branded ceramic mug.
- Volume: 12 oz
$15.00
These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand.
- Allows use of any kickstand while protecting chainstays from damage
- Includes two plates to protect the top and bottom of the chainstays
- Compatible with 2020 and newer Disc Trucker frames
$15.00
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague.
- Compatible with 2019 and older Long Haul and Disc Trucker frames
$15.00
Show Surly pride and add some flare with these stickers. Slap one on your helmet, bike, or whatever you choose.
$15.00
Surly Big Dummy Frame Stickers/Decals
- For repair, repaint or whatever
- Dry transfer style
- Headbadge included
$15.00
For repair, repaint, or whatever
- Dry transfer style
- Headbadge included
$15.00
Karate Monkey Frame Stickers/Decals
- For repair, repaint, or whatever
- Dry transfer style
- Headbadge included
$15.00
Surly Krampus Frame Stickers/Decals
- For repair, repaint, or whatever
- Dry transfer style
- Headbadge included
$15.00
Surly Wednesday Frame Stickers/Decals
- For repair, repaint, or whatever
- Dry transfer style
- Headbadge included
$15.00
These nifty, stainless steel clamp-on loops mount to your saddle's rails so you can use a saddle bag.
Not suggested for carbon rails. The price is per pair.
- Stainless steel construction.
- Clamps right onto your existing saddle rails.
- Not compatible with carbon rails
- Total weight: 1oz
- This package includes 2 Saddle Loops and a 550lb Paracord for use as the back "suspension" strap
- Excellent for use with Roadrunner Bags Burrito Bag
$15.99
Small PVC top tube protector. Helps protect your top tube if your drop bars spin into your frame in a fall. Fits 1-1/8" top tubes.
Note: To ease installation soften the PVC by heating with a hair dryer or place it in very hot water for a few minutes.
- Modern, minimalist top tube protector
- Easy on-and-off installation
$16.99
Protect your frame from impacts, nicks, and scratches.
- A clear self adhesive frame protector film (roll)
- Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$17.95
Made of aluminum and embossed with the “Bicycle Tools” label.
Dimensions: 26.5 x 6.5-inches
$17.99
- UV stabilized stretch polyurethane strap
- Securely fastens spare tube or gear to your frame
- Won't absorb water and mud like a Velcro strap and won't scratch your frame
$19.99
Protect your frame from impacts, nicks, and scratches.
- A clear self adhesive frame protector film (roll)
- Roll size: 75mm x 1.5m x 0.2mm (thick), 2" x 60"
$19.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks
- Durable, weatherproof 3M adhesive
- 2-piece pack is designed to fit most cranks
$19.99
Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice.
- Works with standard 3/8" tap handles and 9/16" pedal spindles
- Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals
- Aluminum construction
- 20 TPI
$19.99
$20.00
On Sale
2-bolt dropout mount, allowing a bike to be kept upright.
- Made of durable aluminum
- Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14)
- 2012-2014 Hardrock and Myka models
- Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount
$20.00
Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame.
RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar.
- Matte black finish
- Fits all makes, models, and sizes
- Protects from harsh chainslap and other damage
- 50mm x 1000mm roll
- Designed around mountain bike geometry
- Kit includes instructions and pre-install cleaning wipe
$20.00
For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar.
- Matte black finish
- Fits all makes, models, and sizes
- Protects from harsh tailgate rub
- Designed around mountain bike geometry
- Kit includes instructions and pre-install cleaning wipe
$20.00
Show Salsa pride and add some flare with these stickers.
- Slap a sticker on your helmet, bike, or whatever you choose
$20.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand.
- Durable aluminum construction.
- Simple, two-bolt dropout mount allows for easy assembly.
- Fits 40mm adapter plates.
- Length: 362mm