Skip to main content

25% Off Select Ibis Bikes | Specialized Drop Bar Closeouts

Save 20% on SalsaSurly, and All-City with codes SALSA20, SURLY20, ALLCITY20 in checkout.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$23.00
The Stu Stick is a 44-gram rotor truing tool. Whether you want to slip it into your hydration pack for that enduro mountain bike ride or travel the world working with one of the staples of cross racing, it's up to the task. You can even use it to crack open a beer after you're done with the day's fun. - Weight: 44g - Made of aluminum
$26.00
These gems are machined to precisely fit the preload adjuster cap on all modern 24mm spindle Shimano cranks. The finger spline offers good leverage to install, remove, or adjust the preload cap. We also added a 5mm hex in the center should you need a little extra leverage that a hex key provides. These are also compatible with our fit kits and with the addition of a saddle height bullet can be used to more accurately measure saddle height.
$30.00 - $131.00
Suspension service is a specialty within bicycle repair, and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead-in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. The problem is that you're still often left with a loose-fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch. We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. Fully CNC-machined with zero lead-in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them slipping off of the top cap under torque. - Made from billet aluminum to exacting tolerances to keep form damaging the suspension - Finger splines so you can thread it easily by hand - 3/8" square drive - Short (1"/25mm for all sizes) to reduce the chance of them coming off of the top cap under torque - Made in Bend, Oregon Applications - 24mm socket - used on SRAM top caps - 26mm socket - used on Marzocchi and Reverb sealheads - 27mm socket - used on Fox and X-Fusion top caps - 30mm socket - used on the RS-1 SRAM sealhead removal tool as well as a handful of other forks. - 6-size set covers most modern suspension forks on the market: 24, 26, 27, 28, 30 and 32mm
$32.00
Bearing drift designed for the SRAM DUB crank platform and use with the Abbey Bike Tools Modular bearing press. SRAM recently launched a new crank platform called DUB to improve bearing durability and compatibility that modern frames have dictated. This 28.99mm spindle and its press fit bottom bracket requires some special drifts to install correctly. We worked with the crew at SRAM to develop tools for this and came up with some simple and important tweaks from a standard bearing drift. These drifts have a tapered boss that forces the small O ring into its gland. A normal drift with a square boss can easily tear the fragile O ring that helps with bearing durability. So this basic modification makes sure your bottom bracket retains the durability it was designed to have. - Comes as a set of two drifts
$40.00
This bottom bracket socket is for use on BSA30 12-notch bottom brackets, such as SRAM DUB, Rotor, Race Face Cinch, and many others that use this common tool interface. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.
$40.00
This bottom bracket socket is for use with Chris King's T47 Bottom Bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket. This socket features a threaded boss to allow you to bolt the tool into place when dealing with these exceptionally thin tool interfaces. This is a feature unique to our tools that adds a layer of protection and security to your parts and tools.
$40.00
This bottom bracket socket is for use with Hope's BSA30 bottom bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.
$40.00
This bottom bracket socket is for use with the Praxis M30 bottom bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.
$40.00
This tool is compatible with all outboard bearing cups that our dual-sided Shimano socket doesn't fit, including Campagnolo, SRAM, FSA, and older Shimano. These gems start as a 7075 aluminum billet and get precisely machined. We take the time to put some nice deep finger splines in this tool so you can thread the cup into the frame by hand with those greasy fingers you haven't washed in a while. - Hard anodized and laser-engraved with torque specs. - Use your favorite 3/8" square drive ratchet or torque wrench to tighten it down.
$42.00
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
$42.00
All the awesomeness of the dual-sided tool but in a single Shimano or Campagnolo version. Updated in 2020, the single-sided tool now has the same size handle (1/2 inch) as the dual-sided tool. - When purchasing the chain whip, buy the 1/2-inch handle chain whip.
$45.00
While most other manufacturers cast or forge their bottom bracket tools, we machine ours for greater precision. Whenever you're dealing with anodized surfaces, great care needs to be taken to keep those surfaces from getting marred, gouged, and stripped out. That can be nearly impossible with some spanner style tools, and difficult with other loose-fitting sockets. The most unique feature about this tool is the inner nub; that nub in the center of the tool is the same size as the crank spindle. What this does is give you a second point of contact that keeps the tool from coming off of the part when trying to remove stubborn cups. This dual sided socket is designed to work with the new Shimano DA-9000/XTR-BB93 bottom bracket as well 6800 Ultegra and 5800 105 11spd groups (BBR-60).
$47.00
The Whip-It maximizes function and simplicity. Made from a 12-inch length of stainless steel, it gives you enough leverage to loosen even the most stubborn cassettes. The Whip-It's round handle provides comfort surpassing other flatbar-style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie, stores inside the handle of the Whip-It; this means the two tools you use together get stored together and travel together, creating less clutter in your tool box.
$53.00
The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!
$53.00
The Geiszler is a stepped adapter designed to work with every thru-axle fitment currently on the market: 12x142, 12x150, 15x100, 20x110, Lefty and 24 Maverick. The tool will allow precision dishing without removal, a notable time saver when wheel building. The Geiszler can be bolted into the hub with the included stud for serious wheel work. It can also be slipped into place for minor adjustments and retained by the compression of the truing stand. This simple tool eliminates clutter around your truing stand and keeps you from searching for the right adapter. - Made in Bend, Oregon - Bolts and washers for use with single-armed wheel stands are available upon request, for free
$53.00
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. - Comes with a solid handle - Note: this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in
$63.00
The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT (SL) version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!
$63.00
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. This SUPER LIGHT version has a hollow handle to save weight for the traveling mechanic. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. - Note, this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in
$105.00
The Shop Hammer has a heat-treated 1.5-inch (38mm) stainless steel head and 12-inch long handle with the same silicone grip from ESI as our Team Issue Hammer. Weighing in at a respectably stout 20oz (566g), they are sure to make short work of setting crown races and removing press fit bottom brackets. - Hammer comes standard with green soft face. Brass tips are also available. - Made in Bend, Oregon
$126.00
With a 15mm box end on one end and a custom 6 and 8 millimeter swivel bit on the opposite end, it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, and at the tool bench. The shop version of the tool gets an extra 6" (15cm) of leverage over the team issue for an overall length of 18 inches. Great for removing those stubborn pedals. - Durable black Cerakote finish - Made in Bend, Oregon
$185.00
Two years in the making, this chain tool is built to stand the test of time. The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins. The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years. The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.
$189.00
Coming in at roughly 265 grams, the Team Issue Titanium Hammer is a big weight savings over more traditional hammers. The soft face is replaceable with commonly available 1" threaded faces. At 12" long, it's compact but still long enough to remove those stubborn bearings. We finish off the Team Issue hammer with a custom silicone grip from ESI to give a bit of cushion from the all-metal construction.
$205.00
We went through extra steps to make this tool half precision measuring instrument and half pry bar. - Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool. - Ability to lock in the feeler so you don't have to second-guess your measurement after bumping it on the tire. - Top half of tool will rotate out of the way of fender stays and frame tubes. - Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic. - T-bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes. - Compact at just under 11" ( 28cm) - Re-buildable - While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt. - Compatible with the three most common wheel sizes (26, 27.5/650B, and 700/29)
$236.00
This is an add-on kit for the popular Abbey Bike Tools Modular bearing press, adding even more versatility for the modern mechanic to deal with all the different shapes, sizes, and styles. The kit includes drifts for all common bearing sizes with a bearing inner diameter (ID) of 15mm or larger. Includes the over-axle drifts required to install bearings in DT, Zipp, and other modern captured bearing hubs. These drifts feature a 1/2" (12.7mm) ID and can be used with other presses if need be. Drifts included with this set precisely fit the following bearing sizes: - 6702 - 6703 - 6704 - 6803 - 6804 - 6902 - 6903 - 6904 - 17287 - 15267/15268
$263.00
This dishing gauge is fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Standoff feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring-loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time-sucking threaded indicators here!
$341.00
The Micro Modular Bearing Press is designed with smaller hub and suspension bearings in mind. With drifts to service bearings with an inside diameter of 13 millimeters and smaller, this is a great choice for those smaller, more delicate bearings. The press head features a true thrust bearing; this unique feature keeps the press action super smooth and cuts down on the effort required. The thrust bearing isolates all of the torque from the compression, which allows your bearing to go in square. It works so well that you don't need even need handles. The press head has a 6mm hex in the top of the press head so you can use it as a bail out gear in case you find something that is fitting excessively tight. Drifts included to precisely fit bearing sizes: - 608 - 608_9 - 609 - 619 - 688 - 6000 - 6001 - 6701 - 6800 - 6801 - 6802 - 6900 - 6901 - 6902
$9.90
- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting
$15.94
- Internal valve prevents air from being drawn into the system - Includes one Quick Bleed valve and 2 sections of bleed tubing
$63.90
- Features bleed fittings for Hope, Magura, Avid, Hayes, Formula and Gatorbrake - Includes bleed tubes, syringes, gloves, and handy carrying case - See BTI part number AX-9617 for Shimano bleed fitting
$4.00
Brake pad spreader tool for Avid Elixir brakes.
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$29.99
Box One Chain Tensioners are extruded then CNC-machined from 7075 aluminum for an optimal balance of strength and weight. A minimalist design adds style while reducing their overall mass. Laser-etched graphics include wheel position guides and two 10mm mounting holes with 15mm of adjustment to ensure perfect adjustability. Fits most frames every time you remove and replace your wheel. When used correctly, Box One tensioners will protect your frame dropouts and hold your rear wheel in place. Keep in mind. However, they aren’t indestructible (neither are your dropouts). Install these lightweight chain tensioners with care and leave the 15-inch breaker bar in your toolbox. Features: - New and Improved - 45mm of Adjustment - XO Skeleton Design - Dual-Sided Adjustment Grid - Dual-Color Adjustment Block Specs: - Axle Size: 10mm (3/8") only - Material: 7075-T6 Aluminum - Hardware: Stainless Steel
$20.00
8 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 110 grams
$25.00
13 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 13 functions - 145 grams
$30.00
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
$35.00
Why has no one invented a multitool that removes a chain quick link? Oh wait, Blackburn has. The Tradesman Multi-Tool has all the hex and Torx keys you're ever going to need in a portable tool, with the addition of a disc pad spreader and a tool that'll remove the most stubborn split chain links. - 18 functions - Quick link storage - Tools include: T25, T30, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm allens, disc brake pad spreader, flathead screwdriver and quick link chain tool compatible with 12 speed and fewer gears - 0.30lbs
$40.00
Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs
$48.00
Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g
$272.00
- 11 speed compatible - Allows removal, installation and peening of rivets
$17.50 - $19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$49.99
Service kit for Cane Creek suspension forks.
$30.00
- Wheel truing dummy axle and cap for Cannondale lefty forks
$60.00
- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle
$31.00
Service tools to ensure long-term success of Chris King hubs. - For use in bearing preload adjustments on all Chris King front and rear hubs
$203.04
Service tools to ensure long-term success of Chris King hubs. - For intensive servicing of Ringdrive system found in most Chris King rear hubs - Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual - Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs
$7.99 - $192.00
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
$25.99
The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g
$29.99
Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty
$29.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
$34.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - Magnetized storage case can be used as a handle for extra leverage - 5-year warranty
$36.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
$39.99
The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g
$42.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage
$19.99
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$18.99
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes
$21.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples
Page 1 of 18 Next page