Skip to main content

25% Off Select Ibis Bikes | Specialized Drop Bar Closeouts

Save 20% on SalsaSurly, and All-City with codes SALSA20, SURLY20, ALLCITY20 in checkout.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$329.99
3T's Ergoterra is wide, ergonomic and designed specifically for cyclocross. This carbon bar's flared drops angle outwards by six degrees for comfort and control over rough terrain. A reinforced central section on the top adds stiffness as well as strength for the option of mounting cross top bar brakes. It has a compact drop and reach, perfect for sprints and reaching your brakes at all times. - Viewed from above, the drops angle outwards by 6° - 45cm model is 42cm at the hoods, while the 47cm model is 44cm at the hoods - Compound-curved bends preserve the vertical alignment of brake/shifter levers at their mounting point, so outward flare does not alter shifters’ ergonomics - The 31.8 mm center section is extended and reinforced to mount cyclocross top brake levers - On rough ground that jostles the rider’s handhold, Ergoterra offers more lateral clearance for the forearms, helpful for run-ups
$11.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$13.92 - $14.66
Super hardened steel designed for high torque Singlespeed and BMX use.
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$0.90
- Aheadset preload adjusting bolt
$6.42
- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through
$9.99
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$4.42
- 40mm long brake blocks with hardware to fit basic caliper brakes
$5.76
- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter
$6.84
- 72mm long molded brake blocks with hardware to fit most linear brakes
$6.84
- 72mm long molded brake blocks with hardware to fit most linear brakes
$7.02
- 72mm long molded brake blocks with smooth post for common cantilever brakes
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm
$8.00
- Aluminum guides for securing housing/tubing to frame cable stops or cable guides
$11.90 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$13.26
- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders
$29.95
- Lightweight stainless steel rotor, Great for all-Mountain or enduro use - International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G
$69.95
- Ultralight stainless steel rotor, ideal for XC use - International standard 6-Bolt 44mm bcd rotor mounting. 56/70/82G
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$10.99
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$12.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Page 1 of 208 Next page