Skip to main content

25% Off Select Ibis Bikes | Specialized Gravel and Road Closeouts

Save 20% on SalsaSurly, and All-City with codes SALSA20, SURLY20, ALLCITY20 in checkout.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$329.99
3T's Ergoterra is wide, ergonomic and designed specifically for cyclocross. This carbon bar's flared drops angle outwards by six degrees for comfort and control over rough terrain. A reinforced central section on the top adds stiffness as well as strength for the option of mounting cross top bar brakes. It has a compact drop and reach, perfect for sprints and reaching your brakes at all times. - Viewed from above, the drops angle outwards by 6° - 45cm model is 42cm at the hoods, while the 47cm model is 44cm at the hoods - Compound-curved bends preserve the vertical alignment of brake/shifter levers at their mounting point, so outward flare does not alter shifters’ ergonomics - The 31.8 mm center section is extended and reinforced to mount cyclocross top brake levers - On rough ground that jostles the rider’s handhold, Ergoterra offers more lateral clearance for the forearms, helpful for run-ups
$11.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$13.92 - $14.66
Super hardened steel designed for high torque Singlespeed and BMX use.
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$0.90
- Aheadset preload adjusting bolt
$6.42
- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through
$119.99
Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories
$9.99
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$4.42
- 40mm long brake blocks with hardware to fit basic caliper brakes
$5.76
- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter
$7.02
- 72mm long molded brake blocks with smooth post for common cantilever brakes
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm
$8.00
- Aluminum guides for securing housing/tubing to frame cable stops or cable guides
$11.90 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$29.95
- Lightweight stainless steel rotor, Great for all-Mountain or enduro use - International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G
$69.95
- Ultralight stainless steel rotor, ideal for XC use - International standard 6-Bolt 44mm bcd rotor mounting. 56/70/82G
$37.95
- Slim style seat with minimal foam padding - Hollow Pivotal bolt for added weight savings - Pivotal fitment only
$71.99
- Made from 13-butted 4130 CrMo - Features a welded crossbar
$71.99
CrMo with internal taper for best strength-to-weight
$155.00
- Molded from multi-directional carbon/Kevlar weave for superior strength - Integrated crossbar for exceptional stiffness - Knurled stem clamp area for improved stem grip - Rider weight limit: 135lbs
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$10.99
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$12.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$15.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$19.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$19.00 - $34.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$23.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
$27.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
$27.00 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$27.00
Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.
$27.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$28.00
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$30.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$34.00
Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.
$36.00 - $64.00
Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$37.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$38.00
The BB5 offers our Tri-Align Caliper Positioning System, tool-free pad replacement, a melt-forged body and an inboard pad adjustment knob. One try and you'll wonder if the BB5's are really entry-level brakes. - Mechanical simplicity
$38.00
Bring the power and performance of disc brakes to your drop bar bike. - Road-specific. - Mechanical simplicity.
$40.00 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$47.00
For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.
$49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$56.00
The BB5 offers our Tri-Align Caliper Positioning System, tool-free pad replacement, a melt-forged body and an inboard pad adjustment knob. One try and you'll wonder if the BB5's are really entry-level brakes. - Mechanical simplicity
$60.00
Perfect for your road, touring or cross bike, Avid's BB5 Road brakes have all the power you need. Used with your road-style levers, they sport precision actuation as well as tool-free pad replacement. Plus, Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition.
$65.00
With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability
$65.00
Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers. - Road-specific - Mechanical simplicity - Adjustability
Page 1 of 103 Next page