Filter By:
- Saddles (329)
- Handlebar Grips/Tape (280)
- Handlebars (325)
- Stems (133)
- Bottom Brackets (228)
- Brakes/Levers/Pads (660)
- Seatposts (110)
- Shifters (129)
- Show More Categories
- Pedals (299)
- Shift/Brake Combinations (80)
- Cables (206)
- Cassettes/Freewheels (157)
- Chainrings (294)
- Chains (139)
- Cranksets (304)
- Derailleurs (180)
- Forks (144)
- Groups (20)
- BMX (45)
- Headsets (188)
- Shocks (40)
- Other (1986)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$309.99
Our Box Two tier's mission in life is to deliver performance similar to the Box One but without its exotic (and costly) features. You still get the Tri-Pack Clutch in our derailleur only it isn't adjustable. The cassette's 11-50T range is equally impressive but we don't cut it out of a single block of steel. The action on the shifter is just as snappy although you don't get the rigid die-cast pull lever. The chain boasts the same unique ability to mate with a wide/narrow chainring except you give up the trick DLC top coat. You're hardly shortchanging yourself with Box Two.
$309.99
Our Box Two tier's mission in life is to deliver performance similar to the Box One but without its exotic (and costly) features. With the Single Shift E-Bike Groupset you still get the Tri-Pack™ Clutch in our derailleur only it isn't adjustable. The cassette's 12-50T range is optimized for E-Bikes. The action on the shifter is limited to one downshift per lever swing. The chain boasts the same unique ability to mate with a wide/narrow chainring except you give up the trick DLC top coat. You're hardly shortchanging yourself with Box Two.
INCLUDES
- Box Two Prime 9 Single Shift Shifter
- Box Two Prime 9 X-Wide Rear Derailleur
- Box Two Prime 9 12-50T E-Bike Cassette
- Box Two Prime 9 126L Chain Nickel
- Box One Shift Cable & Housing Kit
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- 1-1/8 Inch 7000 Series Aluminum Steerer Tube
- Standard Size Fork for Larger-Sized Racers
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bonded Dropouts
COMPATIBILITY
- Box Two 1.1/8" Integrated Headset
- Box One Carbon 45x45 1.1/8" Integrated Headset
- Box Two Threadless Headset
- Box Two Headset Spacers
- Box One Front Load Stem
- Box One Top Load Stem
- Box Two Front Load Stem
- Box Two Top Load Stem
- Box One Delta Stem
- Box One Center Clamp Stem
- Box Two Center Clamp Stem
SPECIFICATIONS
- 20 Inch 24 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1-1/8 Inch
- Weight
- 20": 560g / 19.75oz
- 24": 585g / 20.7oz
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
FEATURES
- Overall Reduced Size for Smaller Racers
- 1 Inch 7000 Series Aluminum Steerer Tube
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bolded Dropouts
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
SPECIFICATIONS
- 20 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1 Inch
- Weight 397g/14.0oz
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard.
FEATURES
- Oversized Technology™
- Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$379.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say goodbye to deflection.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- Oversized Technology™
- Tapered Steerer Tube to Reduce Deflection
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$399.99
The Box Two M30-P crankset is a slightly less acute embodiment of our Oversized technology for cranksets. We squeeze in a show-stopping Praxis™ made 30mm that’s been cold-forged from 7075 T6 aluminum and then painstakingly ground to precision. You’ll be relieved to know this will all fit in a European bottom bracket. The crank arms and spider are poached from the Box One M35 model and as a result, you get all that hollow-forged generosity to help you put that power down. These cranks are engineered for the larger-sized racers.
- Oversized Technology™ Hollow Forged Design
- Oversized 30mm Alloy Spindle
- Self-Extracting Crank Bolt System
- 4-bolt 104 BCD Spider with Flex-Resistant Ring
- External BSA 30mm BB Included
- Weight: 28.6oz
- Drive Side Compatibility: Right Hand Drive
- Crankset Style: 2-Piece
- BB Style: Euro
- Chainring BCD: 104
- BB Included: Yes
$10.99
Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.
$10.99
Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right.
- Flangeless Dan Paley zigzag design
- Krayton rubber
- Bar ends included
$39.99
Seating simplicity, the Mondo ‘Logo’ seat is a throwback to simpler days in the saddle.
- Tough Kevlar construction and pivotal mounting
$39.99
- KlickFix bracket for use with all Basil handlebar bags requiring a KlickFix adapter
- Easily & quickly removable
- Suitable for handlebars measuring 22mm to 31.8mm
- Made form composite materials
- Adjustable angle
$16.00 - $20.00
Benno replacement derailleur hangers.
- Benno Derailleur Hanger: eJoy, eScout, 2017-21, Silver
$34.00
RemiDemi Seatpost Clamp - 2020-2021
- Replacement parts for Benno Ebikes.
$53.00
Passenger Handlebar Kit - For 30.9 Seatposts, Fits Boost, 46er, RemiDemi, RemiDemi XL
- Includes adjustable clamp-on Stem, handlebar and grips
$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces
$62.00
The Cleat Screw Kit is a bike fitter's best friend because it eliminates the difficulty (and in some cases impossibility) of finding the perfect type and length of cleat screw.
- The Kit contains 150 screws (15 different screw types/sizes with a quantity of 10 each)
- SPD / MTB Compatible Cleat Screws - 4mm Hex countersunk M5x0.8, compatible with most 2-hole cleats, and are black oxide coated carbon steel. Kit includes 10 of each: 10mm (PD0219), 12mm (PD1576), 14mm (PD1577), and 16mm (PD1578).
- Look / Shimano Compatible Cleat Screws - 4mm Hex Button Head M5x0.8, are compatible with most 3-hole cleats, and made from stainless steel with Nylock®. Kit includes 10 of each: 8mm (PD1579), 10mm (PD1580), 12mm (PD1581), 14mm (PD1582), 16mm (PD1583), 18mm (PD1584), and 20mm (PD1585).
- Speedplay Walkable Compatible Cleat Screws - Phillips Recessed Button Head - M4x0.7, are 4-hole cleat compatible and made from stainless steel with Nylock®. Kit includes 10 of each: 9mm (PD1590), 11mm (PD1591), 13mm (PD1592), and 15mm (PD1593).
Because of the many technologies featured, SAGMA is likely the most advanced bicycle saddle you can currently find on the market.
Not only the patented rail suspension and the new foam technology and Skin cover, but also the super short overall length are ahead of the competition.
SAGMA Carbon is our halo model with lighter and flexier Carbon rails as opposed to aluminum rails on the standard SAGMA.
- Rail Suspension Design
- idbeads foam technology with low speed rebound properties
- PU-Skin covering
- Carbon reinforced shell
- Exchangeable shock absorber units with 3 different hardnesses (soft, regular, hard)
- Carbon rails 7x10mm (high-oval)
- 210g
This BikeYoke allows the use of a standard shock in your Specialized bike.
Enduro 2015-2016, 650b
Includes:
- 1x BikeYoke #4 (Y04 for 200 x 57/7.875" x 2.25" shock)
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
$9.99
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
$20.00
Who does not love a nicely cleaned up cockpit?
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes.
Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position:
Compatible brakes:
- Deore BL-M6000
- Deore BL-501
- SLX BL-M7000
- XT BL-M8000/8020
- XTR BL-M 9000/9020
Compatible remotes/shift levers:
- BikeYoke Triggy serie
- OneUp Remote V2
- Specialized Command Post SLR
- Race Race Remote Turbine R
- SRAM EX1
- SRAM NX EAGLE
- SRAM GX / GX EAGLE / GX EAGLE AXS
- SRAM X1
- SRAM X01 / X01 EAGLE / X01 EAGLE AXS
- SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS
- Rock Shox Reverb AXS
$22.00
Who does not love a nicely cleaned up cockpit?
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible.
Compatible brakes:
- SLX BL-M675-B
- XT BL-M785-B
- Zee BL-M640-B
- Saint BL-M820-B
Compatible remotes/shift levers:
- BikeYoke Triggy serie
- OneUp Remote V2
- Specialized Command Post SLR
- Race Race Remote Turbine R
- SRAM EX1
- SRAM NX EAGLE
- SRAM GX / GX EAGLE / GX EAGLE AXS
- SRAM X1
- SRAM X01 / X01 EAGLE / X01 EAGLE AXS
- SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS
- Rock Shox Reverb AXS
$24.00
Who does not love a nicely cleaned up cockpit?
This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position:
Compatible brakes:
- Deore BL-M6100/6120
- SLX BL-M7100/7120
- XT BL-M8100/8120
- XTR BL-M9100/9120
Compatible remotes/shift levers:
- BikeYoke Triggy serie
- OneUp Remote V2
- Specialized Command Post SLR
- Race Race Remote Turbine R
- SRAM EX1
- SRAM NX EAGLE
- SRAM GX / GX EAGLE / GX EAGLE AXS
- SRAM X1
- SRAM X01 / X01 EAGLE / X01 EAGLE AXS
- SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS
- Rock Shox Reverb AXS
$32.99
We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place.
Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and
dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation.
Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification.
- 31.8mm
- 34.9/35mm
Features
- extremely low weight: 7g (31.8mm)
- material: Al-7075-T6, fine-feed CNC finish
- collar-less design for more even clamping force distribution
- Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice)
- "Slip-Stopp" installation aids
$35.75
Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt.
Weight of Shifty pulley: 6.3g
Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle.
Shifty fits following rear derailleurs:
- XX1
- XX1 Eagle
- X01
- X01 Eagle
- X01 DH
- X1
- GX1
- GX Eagle*
- EX1
- NX*
- NX Eagle*
For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit.
1 Set Shifty includes:
- 1x Shifty pulley - 6061-T6 aluminium, anodized
- 1x axle
- 1x bolt