Derailleurs

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately

- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer

- Upper pulley has larger teeth for increased chain control

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 8T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 42T - Total capacity: 18T

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 48T - Total capacity: 20T

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x8 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 42T/48T - Total capacity: 20T

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger

Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains

FD-A073 Tourney Front Derailleur for 2x7 or 3x7 drivetrains. - SG-X chainring compatible - Quick assembly - Interchangeable with SHIMANO road 7-speed system - Easy adjusting - Light operation and smooth shifting

Shimano Tourney TX is a basic 8-speed rear derailleur for entry-level sport bikes and riders. Enjoy durable, trouble free, and stable performance. - Maximum cog size: 34t - Total capacity: 43t

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

The Shimano Altus 3x9 speed front derailleur offers light action and improved clearance for wide tires and mud. - 50mm chainline - Chrome-plated cage - 9-Speed

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

The Shimano Tourney rear derailleur offers smooth shifting with SIS and HyperGlide technologies for 7-speed drivetrains. - Maximum cog size: 28t - Total capacity: 37t

The Shimano Tourney RD-A070 rear derailleur provides durable and reliable shifting for 7-speed drivetrains. - Smartcage design with 11/13t pulleys allows for short cage and a 28t max low cog - Maximum cog size: 28t - Total capacity: 37t

The Shimano Altus RD-M310 rear derailleur is a quality, durable replacement rear derailleur for 7 and 8-speed drivetrains. - 13t upper and 15t lower pulleys - Maximum cog size: 34t - Total capacity: 43t

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

- Spring type: Top Normal - Min cog: 11T - Max cog: 34T - Total capacity: 43T

Shimano's Alivio FD-T4000 Front Derailleur shifts your 3x9-speed setup beautifully. - Drivetrain Speeds: 9 - Double or Triple: Triple - Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Dual - Front Derailleur Clamp: 28.6mm (1-1/8") , 31.8mm (1-1/4") , 34.9mm (1-3/8") - Function: Top Swing - Max Ring Size: 48T

- Model Number: FD-R3000 - Series: SORA - Top Gear Teeth: 46-52T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options