Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Shimano Dura-Ace 9100 11-Speed Rear Derailleur
$242.99
- Stable Shifting Performance - Pulley Follow-Up In Certain Distance - Shimano Shadow Rd Construction - Low Profile Rear Derailleur Design - Race Endurance For Less Damage In Crush - Adapted For Race Specific Frame Design - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
Shimano Deore XT 8070 Di2 Front Derailleur w/o Bracket
$239.99
Shimano XT FD-M8070 Di2 Front Derailleurs - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Increased power vs. mechanical - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Series : Shimano Deore XT - Swing Action: Down Swing - Top Gear Teeth: 38-34T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 134 grams
Shimano Ultegra R8050 Di2 Front Derailleur
$239.99
Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams
Shimano GRX RX815 Di2 11-Speed Front Derailleur
$238.99
The Shimano GRX RX815 Di2 front derailleur delivers quick and smooth front shifting even under high pedaling torque. It's designed for a wider, 17T front chainring range, has programmed chain guide trim settings, and can be used in full or semi Shimano Synchronized Shift modes. - Chainline +2.5 mm vs. conventional road FD - Wide, 17T front range chainring range - Wider tire clearance
SRAM X1 Type 2.1 Rear Derailleur
$236.00
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM X01 Type 2.1 Rear Derailleur
$230.00
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM Force 1 Rear Derailleur
$225.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
SRAM X01 Eagle Rear Derailleur
$214.00 - $225.00
Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes
Campagnolo Super Record 12 Speed Front Derailleur
$203.45
The new Super Record 12x2 Speed mechanical front derailleur: lightness, design, fluidity, and effectiveness. The new Super Record 12x2 Speed mechanical front derailleur introduces many new techniques, starting with the leverage systems designed to speed up derailings. Less effort is needed to shift owing to the split front connecting rod, which prevents contact with the travel limit screw. Whilst the shape of the inner cage plate is engineered to guarantee maximum readiness for upshifting, the external monolith body in carbon fiber has been shaped to enhance the efficiency of the chain movement when going uphill and the readiness and fluidity in descent. The aesthetic impact of the component is consistent with the rest of the Super Record groupset due to the use of unidirectional carbon fiber and titanium stop screws. Micro-adjustments to the front derailleur position, which can be activated by the controls, help to prevent any contact with the chain, even in the case of maximum crossover. As regards compatibility, the new Super Record 12x2 Speed front derailleur allows the use of hoods measuring up to 32 mm thanks to the new upper connector rod and the double fixing position of the control cable.
SRAM Rival eTap AXS Front Derailleur
$185.00
The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included
SRAM Rival eTap AXS Wide Front Derailleur
$185.00
The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included
Shimano Saint Shadow + Rear Derailleur
$178.99
Shimano's Saint Rear Derailleur is packed with World Cup-worthy features, like an integrated skid plate, a urethane bump stop, and low-profile Shadow positioning, all of which protect your derailleur as you smash through rock gardens and overgrown singletrack. Shimano Plus Technology minimizes chain and impact noise, and maintains perfect chain tension so you can shift with precision and authority no matter how rough the terrain gets. The Saint Rear Derailleur also has a mode converter that lets you use either a close-ratio DH cassette, or a wider-ratio freeride cassette.
Campagnolo Chorus 12-Speed Rear Derailleur
$178.95
The Campagnolo Chorus 12-speed rear derailleur features 3D Embrace technology and 12-tooth pulley wheels making it suitable for all cassettes as the distance stays optimum on each individual sprocket, regardless of the cassette selected. - Embrace technology not only keeps the rear derailleur vertically aligned in the perfect position for each sprocket, it now makes the upper pulley wheel advance perfectly in the direction the bike is advancing - On rough roads, the spring positioned between the upper body and the pivot absorbs the vibrations, ensuring the chain always rests properly on the sprockets - The pulley wheels on the 12-tooth derailleur cage allow the chain to move more smoothly - The initial position of the rear derailleur can be adjusted to suit any cassette. - The rear derailleur is positioned further back, making it easier to slide the wheel out and replace it - Upper and lower body crafted from technopolymer that is reinforced with long carbon fiber for exceptional durability Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Weight: 240g
SRAM EX1 X-Horizon Rear Derailleur
$165.00
The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48
SRAM Ceramic Bearing Rear Derailleur Pulleys
$161.00
SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$161.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
SRAM GX Eagle Rear Derailleur
$135.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
BOX Two Prime 9 X-Wide Rear Derailleur
$134.99
The Box Two Prime 9 Rear Derailleur is very similar to the Box One version however, to be more wallet friendly, it offers a non adjustable Tri-Pack Clutch, bushing pulleys and some muted finishes. Box Two rear derailleurs are still optimized for 11-50t cassettes and offer durability and performance for the most demanding terrain, just at lower price!
Shimano Dura-Ace 9100 11-Speed Front Derailleur
$134.99
- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm
Paul Component Engineering Melvin Chain Tensioner
$131.00
Want to build a single speed without having to buy a dedicated frame? Try the Melvin. The Melvin bolts to the frame where the rear derailleur would normally go and allows the use of a single speed rear wheel on bikes with vertical dropouts. - Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
SRAM GX 2x11 Rear Derailleur
$131.00
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible
Shimano XTR FD-9100 Side Swing Front Derailleur
$129.99
Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter
Campagnolo Record 12 Speed Front Derailleur
$125.00
The new mechanical Record 12x2 Speed derailleur: speed, dexterity, precision, and effectiveness. The Campy Tech Lab designers focused on functionality, performance, and compatibility when redesigning the new front derailleur. The new Record mechanical 12x2 Speed derailleur reveals various technical innovations; starting with the leverage system, which is designed to speed-up shifting. Less effort is required for shifting thanks to the split front link rod, which avoids contact with the travel limit screw, and the shape of the inner cage plate, designed to match the new 12-speed chain’s characteristics. The micro-adjustments to the front derailleur position (which can be activated by the controls) make it possible to avoid any chain contact, even in cases of maximum crossing. The plate positioned on the aluminum outer cage prevents the chain from escaping when upshifting and increases speed in the downshift phase, as well as creating a quieter transmission. As far as compatibility is concerned, the new Record 12x2 Speed front derailleur allows tires up to 32mm thanks to the new upper connecting rod and the double fixing of the cable.
SRAM GX 1x11 X-Horizon Rear Derailleur
$123.00
SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage
SRAM Rival 1 Rear Derailleur
$123.00
The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g
SRAM Force WiFli Rear Derailleur
$122.00
SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.
SRAM RED Front Derailleur
$120.00
The SRAM RED front derailleur, thanks to Yaw technology, changes everything, eliminating the need for shifter trim. Instead of simply moving back and forth, the derailleur cage actually rotates to maintain a consistent angular relationship with the chain. As a result, shifts feel more direct and precise. Combined with the SRAM RED crankset and X-GlideR chainrings, it delivers an unmatched performance advantage in front shifting. - SRAM Road 11-speed compatible - Yaw Technology - Slim spring design eliminates frame interference - Optimized for shifting with X-GlideR chainrings - Precision install markings - Integrated chain spotter protects your frame without adding any extra clunk and adjusts independently of the derailleur itself - Speeds: 2x11 - Material: Aluminum outer cage, Tool steel inner cage, Composite tail - Weight: 69g (braze-on), Chain spotter: 10.2 grams - Outer Cage: Aluminum - Compatibility: SRAM RED 22 & Force 22 Front Shift-Brake levers & X-GlideR Chainrings, SRAM R2C Aero SL-1190 shifters, SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Inner Cage: Tool steel
Shimano XT M8100 Rear Derailleur for 2x Drivetrains
$118.99
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 2 x 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 2 x 12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 45 teeth - Largest Cog: 45 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
Shimano Ultegra RD-X800 Rear Derailleur
$117.99
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
SRAM NX Eagle Rear Derailleur
$115.00
This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel