Shoes

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

For some serious protection in the cold and wet for your toes, slip on a pair of the Neoprene Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Rear opening with zippers securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion resistant toe and heel sole utilizes universal welted velcro closure, so these covers are compatible with both road and mountain shoes. - Fabric Content: 100% Neoprene

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure

Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.

CLIPLESS TRAIL SHOE FOR HIGH PERFORMANCE RIDING A lightweight trail shoe with comfort and performance at the core of its design. The ATOP lace system is fast, convenient and precise. Make micro corrections fast and easily so that you have total bike control and comfort. This clipless shoe features a long cleat channel for the perfect pedal set up. Move the block forwards for a more power orientated ride, or farther back for more aggressive gravity riding. The breathable membrane makes this fast-looking trail shoe ideal for Spring / Summer / Autumn riding conditions. It is reinforced in key areas to ensure protection and extended product life. The overall shape, fit and construction of the Leatt 6.0 is ideal for trail, all-mtn and enduro riding. The sole features our durable RideGrip™ compound with a WaffleGrip pattern. This guarantees shoe durability, bike feel and grip off the bike if pushing the bike uphill or on slippery surfaces. If comfort and performance is what you are looking for, then the Leatt 6.0 are your next pair of shoes! Leatt SPD Channel offers all-pedal compatibility: - Unique to Leatt SPD channels with extended travel for all type of riding - Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike - ATOP lacing system allows single hand micro adjustments - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Adjustable, durable and breathable shoe upper: - Breathable mesh construction allows great temperature regulation and quick drying - TPU reinforcement for protection against the elements Control Flex Shank: - Semi-Rigid Flex control for great bike feel - Integrated design for a closer foot to pedal connection Midsole: - Anti-compression EVA for vibration and shock absorption Insole: - Anti-compression EVA insole for comfort - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Molded heel shield for protection and heel retention - Strategically placed TPU reinforcement on toe, heel and perimeter Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor Heel Grip: - Directional heel grip lining allows easy foot entry and retention while pedaling Weight: - 920 grams a pair US9.5

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

Look good, feel good, ride good—and adage as old as cycling itself… That’s the idea behind the new Recon ADV, where riding in style is just as important as the actual ride. This gravel shoe checks all the boxes in the aesthetics department but is no slouch when it comes to cranking out miles. Recon ADV is suited for the rider who values adventure, time on the bike, and needs an all-day shoe that will keep going when the gravel ends. Recon ADV’s excellent walkability is made possible by STRIDE toe-flex technology, providing a more natural feeling for off-the-bike adventuring. Don’t let the good looks fool you, this shoe is also built inside-out with our Body Geometry technology, making it a menace on the pedals. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - STRIDE toe-flex technology allows greater toe flex for steep inclines inclines and improved walkability - Laser perforated upper features microfiber backing for better moisture management and supple feeling - Ride or hike in confidence with a TPU mudguard that offers protection from stone strikes - Pontoons create a stable pedal platform as well as aiding walking feel - Greater SlipNot rubber tread coverage on sole that’s optimized for gravel traction - Features proven Body Geometry technology like the Varus Wedge to maintain efficient and comfortable hip, knee, and foot alignment while riding

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa guarantee. - Lollipop nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment

Flat Pedal Mountain Bike Shoes with an Impact-Resistant Toe Box The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant urethane toe box - Stealth S1 Dotty rubber outsole - Imported

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

For the Women's Latch mountain bike shoe, we started with a new fit that brings the foot closer to the pedal and flattens the sole profile, optimizing the contact patch between sole and pedal. Then we collaborated with a team of rubber engineers to formulate Tack Rubber, a highly elastic compound that matches grip with durability in our new Gamma tread design. And at the heart of the shoe is a revelation in performance called Mute Foam, a midsole foam that's specially engineered with a slow-rebound action that cuts chatter and vibration to help keep you connected to the pedal, regardless of ruts, roots, and rocks. The unique combination of fit, a fast-drying microfiber upper, the grip of Tack Rubber, and the damping of Mute Foam makes Latch a new benchmark in flat-pedal performance.

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

If you're on the hunt for a capable, tough, and versatile pair of mountain biking shoes, look no further than the Rime 1.0. They feature a host of Body Geometry hallmarks that you'll find in all of our shoes, plus sweet tech like an X-PEL water management system that reduces water absorption while drastically improving dry time. And, to round out the package, we included a SlipNot Rubber outsole, a Lollipop midsole, and a relaxed fit that balances pedal feel and off-the-bike comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - X-PEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Laces and Hook-and-loop overstrap provide a comfortable with one-hand adjustability - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

Great for riding on the course or off the beaten track, the Sector mountain bike shoe is ready to power up for adventures. Race-ready. Adventure inspired. The Sector combines a supple, breathable Synchwire upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D molded footbed with Aegis anti-microbial treatment enhances comfort and fit, which is adjustable via dual BOA L6 dials featuring 1mm adjustment and macro release. It's a great choice for riders looking for inspired performance that's capable on the course or off the beaten track. - One-piece Synchwire upper with thermo-bonded exo-structure - Reinforced heel and toe sections - Dual Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - 3D molded footbed with medium arch support - Carbon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware - 342 grams (size 42)

PERFORMANCE FLAT PEDAL The performance sneaker that keeps you cool and in control. While the standard 3.0 Flat shoe has laces, this 3.0 PRO model features a micro-adjuster MOZ cable fit system. This lets you make micro-adjustments on or off the bike. Get the perfect fit and then lock in for the ride! The stabilizing neoprene ankle collar will give you that feeling of added confidence as well. How about the grip? Well, this shoe features Leatt RideGrip™ Pro rubber compound which is softer than the standard RideGrip™ rubber. This means pedal connectivity is even better and the shoe will hold better grip in slippy conditions. The improved WaffleGrip Pro sole pattern is an inverted version of Leatt’s WaffleGrip. This allows short pins to dig deep into the sole and delivers great off bike traction when you need to walk. If you want to stay on top of the game, then you need the all new Leatt MTB shoes. - NEW MOZ cable lacing fit system located on top of the shoe - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on - NEW RideGrip™ PRO compound for improved pedal feel and control - Sticky Leatt Lab compound sole for ultimate bike control - Maximum tear, puncture and abrasion resistance - NEW improved WaffleGrip Pro pattern for improved grip with short pins - Inverted WaffleGrip Pro pattern in pedal area for maximum pin grip - Heel and toe mud flow channels for grip in all-weather conditions - Durable synthetic leather shoe upper suitable for tough riding conditions: - Tension straps for foot security and weather protection - Ventilation in the toe box and sides Midsole: - Anti-compression EVA midsole for comfort. Insole: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Stabilizing neoprene ankle collar - Molded stabilizing heel and rigid reinforced toe area Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene