Racks

The Fairdale Adjust-A-Rack is a new take on the rear cargo rack. The rack is designed to be extremely easy to install. Fold the legs out, bolt them on to the bike and use the sliding adjustment to level the top of the rack. Unlike many other racks the Adjust-A-Rack requires no cutting or tedious resizing to make it fit.

The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2? (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

The Benno Mini Sideloader set extends the carrying capacity and convenience of the Boost E and Carry On bikes when used with select Benno Racks. The Sideloader allows the use of the large Utility Pannier bags, or when used with the Wheel Guard set creates a footrest for children riding on the rear rack. - Max Load 33lb per side. Maximum combined load of rack and Sideloaders not to exceed 110lbs - Sold in pairs - Fits Benno Boost E and Carry On models

Benno Utility Rear Rack #1 Plus is a direct fit to the Benno Boost E bikes. The 66cm x 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptor. The rack is rated to carry up to 130lbs of kids, gear, or any combination of both. - Dimensions: Deck 18cm x 66cm (W x L) - Max load 130lbs/60kg - Fits two Yepp Easyfit baby seats without adapter - Weight: 2300g - Fits Benno Boost E bikes

Benno Utility Rear Rack #3 - Compatible With Carry-On, Boost EVO 1-3 (16-19).

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 242 x 97 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 3 kg WEIGHT - 281 g (incl. Straps)

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)

Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.

All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity