Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bikes

Ibis Ripmo AF NGX
$4,299.00
Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It's everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, aluminum, and tita­ni­um-remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times, too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DVO Now that we made the frames lever­age rate pro­gres­sive enough for a coil we had to find a coil shock that could han­dle the increased stress of being dri­ven off of a cle­vis. The DVO JadeX is up to the chal­lenge so the Rip­mo AF comes with cus­tom-tuned DVO suspension. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures, which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight-line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing, because it's easy to under­stand, but our ultra-low standovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8" (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8" (152cm – 172cm) can use a post 125mm or longer, depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't.
Ibis Hakka MX Shimano GRX
$4,399.00
The Hakka MX is our answer to the Swiss Army Knife. With its ultra ver­sa­tile geom­e­try and 1000g frame weight, the Hak­ka MX is just as hap­py crush­ing the local club ride as is it is jump­ing bar­ri­ers or camp­ing out.
Ibis Ripmo AF SLX
$4,399.00
Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It's everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, aluminum, and tita­ni­um-remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times, too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DVO Now that we made the frames lever­age rate pro­gres­sive enough for a coil we had to find a coil shock that could han­dle the increased stress of being dri­ven off of a cle­vis. The DVO JadeX is up to the chal­lenge so the Rip­mo AF comes with cus­tom-tuned DVO suspension. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures, which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight-line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing, because it's easy to under­stand, but our ultra-low standovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8" (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8" (152cm – 172cm) can use a post 125mm or longer, depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't.
Ibis Hakka MX Rival
$4,599.00
The Hakka MX is our answer to the Swiss Army Knife. LIGHTWEIGHT With its ultra-ver­sa­tile geom­e­try and 1000g frame weight, the Hak­ka MX is just as hap­py crush­ing the local club ride as is it is jump­ng bar­ri­ers or camp­ing out. VERSATILE It's good to have options. With the Hak­ka MX, you can run road, cross, and grav­el-friend­ly 700c wheels, or, if you are into burli­er back­coun­try explo­ration, go with 27.5/650B. With the Hak­ka MX, you don't have to pick one tire option or the oth­er. Our sub­tle sculpted ­chain­stays give the frame clear­ance for up to 700 x 40c or 27.5 x 2.1" tires. CABLE ROUTING OPTIONS GALORE No mat­ter what dri­ve­train you pre­fer, 1x, elec­tron­ic, or 2x, the Hak­ka MX has you cov­ered. The frame has inter­nal cable rout­ing pro­vi­sions for every dri­ve­train on the mar­ket, plus a drop­per post. We've even includ­ed a slick Di2 bat­tery mount inside the downtube. BOTTOM BRACKET We've tried every bot­tom brack­et under the sun and in the end, we haven't found any­thing that's more reli­able than a thread­ed BB. Our Hak­ka fea­tures the T47 BB stan­dard, which uses 30mm bear­ings, enabling you to use the recent crop of light­weight cranksets. This is the best way to com­bine a thread­ed BB with 30mm spin­dle com­pat­i­bil­i­ty. It's light­weight, qui­et, and durable, because no one likes a creaky bike. DISC BRAKES & FENDER MOUNTS The Hak­ka MX has flat-mount disc mounts and fits a 160mm rotor. The ENVE G Series Grav­el fork has fend­er eye­lets, inter­nal cable rout­ing, and mon­ster clear­ance for 700c x 50c or 27.5 x 2.25" tires. There's also a remov­able rear fend­er mount on the seat stays.
Ibis Hakka MX GRX
$5,748.00
The Hakka MX is our answer to the Swiss Army Knife. LIGHTWEIGHT With its ultra-ver­sa­tile geom­e­try and 1000g frame weight, the Hak­ka MX is just as hap­py crush­ing the local club ride as is it is jump­ng bar­ri­ers or camp­ing out. VERSATILE It's good to have options. With the Hak­ka MX, you can run road, cross, and grav­el-friend­ly 700c wheels, or, if you are into burli­er back­coun­try explo­ration, go with 27.5/650B. With the Hak­ka MX, you don't have to pick one tire option or the oth­er. Our sub­tle sculpted ­chain­stays give the frame clear­ance for up to 700 x 40c or 27.5 x 2.1" tires. CABLE ROUTING OPTIONS GALORE No mat­ter what dri­ve­train you pre­fer, 1x, elec­tron­ic, or 2x, the Hak­ka MX has you cov­ered. The frame has inter­nal cable rout­ing pro­vi­sions for every dri­ve­train on the mar­ket, plus a drop­per post. We've even includ­ed a slick Di2 bat­tery mount inside the downtube. BOTTOM BRACKET We've tried every bot­tom brack­et under the sun and in the end, we haven't found any­thing that's more reli­able than a thread­ed BB. Our Hak­ka fea­tures the T47 BB stan­dard, which uses 30mm bear­ings, enabling you to use the recent crop of light­weight cranksets. This is the best way to com­bine a thread­ed BB with 30mm spin­dle com­pat­i­bil­i­ty. It's light­weight, qui­et, and durable, because no one likes a creaky bike. DISC BRAKES & FENDER MOUNTS The Hak­ka MX has flat-mount disc mounts and fits a 160mm rotor. The ENVE G Series Grav­el fork has fend­er eye­lets, inter­nal cable rout­ing, and mon­ster clear­ance for 700c x 50c or 27.5 x 2.25" tires. There's also a remov­able rear fend­er mount on the seat stays.
Ibis HD5 SRAM GX S35A
$5,899.00
Enduro World Series tested and team-approved, the HD5 lives for ragged descents combined with real-world climbs requiring efficiency, positioning and poise. Which it delivers in spades. It’s the ultimate 27.5” brawler, living to ride as hard up as down with 153mm of dw-link controlled travel and a 170mm fork. 76 degrees of climbing we'd like you to meet 64 degrees of descending.
Ibis Mojo V4 NGX
$6,799.00
The word Mojo refers to a magic spell or charm, and more broadly, a magical power. Since its introduction in 1994, the Mojo has delivered a wicked combination of fun and all-mountain prowess. GEOMETRY The Mojo V4 fea­tures a 76.6-degree, get-you-up-that-hill seat tube angle, our short­est chain­stays, and a spa­cious reach with a 65.4-degree head­tube angle. This enchant­i­ng com­bi­na­tion rolls on 27.5" wheels to deliv­er that hov­er­bike feel with on-trail confidence. DW-LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. TRACTION TUNE Our cus­­tom-tuned sus­pen­sion fea­tures extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. When paired with our dw-link sus­pen­sion plat­form, Trac­tion Tune allows the Mojo to track like a big bike with­out com­pro­mis­ing crisp ped­al­ing per­for­mance. PICK YOUR SIZE All four sizes have low stan­dover heights and short­ened seat tubes for long drop­per posts. Now you can choose your frame based on reach-rid­ers 5-feet tall eas­i­ly fit on a small and still enjoy a 125mm drop­per, while most medi­um and up rid­ers can enjoy a 185mm. All sizes fit a water bot­tle, and those look­ing to go packless can run our after­mar­ket Pork Chop bag. FORK OFFSET Reduced-off­set forks give the front wheel greater sta­bil­i­ty at speed and an addi­tion­al sense of steadi­ness at slow speeds too. The Mojo is designed to excel in tech­ni­cal, demand­ing ter­rain, and the 37mm-off­set gives that extra bit of con­fi­dence and con­trol in the most chal­leng­ing situations. TIRE CLEARANCE The Mojo has clear­ance for 27.5"x2.6" tires. You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter and stiffer than bear­ings and are vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance-no mat­ter how much you spend. The Mojo weighs a svelte 5.9 lbs with an inline shock, and com­plete builds start at 26.7 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT There if you want it, remov­able if you don't. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Ibis Ripmo 2 Fox X2 GX S35C
$6,963.00
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides. GEOMETRY The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn’t wan­der while climb­ing, and doesn’t hold you back descend­ing. It works — all day up, all day down, all day in between.
Ibis Ripmo SLX
$7,549.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Ripley XT
$7,849.00 - $8,399.00
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.
Ibis Mojo V4 X01
$7,899.00
The word Mojo refers to a magic spell or charm, and more broadly, a magical power. Since its introduction in 1994, the Mojo has delivered a wicked combination of fun and all-mountain prowess. GEOMETRY The Mojo V4 fea­tures a 76.6-degree, get-you-up-that-hill seat tube angle, our short­est chain­stays, and a spa­cious reach with a 65.4-degree head­tube angle. This enchant­i­ng com­bi­na­tion rolls on 27.5" wheels to deliv­er that hov­er­bike feel with on-trail confidence. DW-LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. TRACTION TUNE Our cus­­tom-tuned sus­pen­sion fea­tures extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. When paired with our dw-link sus­pen­sion plat­form, Trac­tion Tune allows the Mojo to track like a big bike with­out com­pro­mis­ing crisp ped­al­ing per­for­mance. PICK YOUR SIZE All four sizes have low stan­dover heights and short­ened seat tubes for long drop­per posts. Now you can choose your frame based on reach-rid­ers 5-feet tall eas­i­ly fit on a small and still enjoy a 125mm drop­per, while most medi­um and up rid­ers can enjoy a 185mm. All sizes fit a water bot­tle, and those look­ing to go packless can run our after­mar­ket Pork Chop bag. FORK OFFSET Reduced-off­set forks give the front wheel greater sta­bil­i­ty at speed and an addi­tion­al sense of steadi­ness at slow speeds too. The Mojo is designed to excel in tech­ni­cal, demand­ing ter­rain, and the 37mm-off­set gives that extra bit of con­fi­dence and con­trol in the most chal­leng­ing situations. TIRE CLEARANCE The Mojo has clear­ance for 27.5"x2.6" tires. You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter and stiffer than bear­ings and are vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance-no mat­ter how much you spend. The Mojo weighs a svelte 5.9 lbs with an inline shock, and com­plete builds start at 26.7 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT There if you want it, remov­able if you don't. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Ripmo XT
$8,149.00 - $8,699.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Ripmo X01
$8,499.00 - $9,899.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works-all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Mojo 4 XTR S35 I9
$9,999.99
The word Mojo refers to a magic spell or charm, and more broadly, a magical power. Since its introduction in 1994, the Mojo has delivered a wicked combination of fun and all-mountain prowess. GEOMETRY The Mojo V4 fea­tures a 76.6-degree, get-you-up-that-hill seat tube angle, our short­est chain­stays, and a spa­cious reach with a 65.4-degree head­tube angle. This enchant­i­ng com­bi­na­tion rolls on 27.5" wheels to deliv­er that hov­er­bike feel with on-trail confidence. DW-LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. TRACTION TUNE Our cus­­tom-tuned sus­pen­sion fea­tures extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. When paired with our dw-link sus­pen­sion plat­form, Trac­tion Tune allows the Mojo to track like a big bike with­out com­pro­mis­ing crisp ped­al­ing per­for­mance. PICK YOUR SIZE All four sizes have low stan­dover heights and short­ened seat tubes for long drop­per posts. Now you can choose your frame based on reach-rid­ers 5-feet tall eas­i­ly fit on a small and still enjoy a 125mm drop­per, while most medi­um and up rid­ers can enjoy a 185mm. All sizes fit a water bot­tle, and those look­ing to go packless can run our after­mar­ket Pork Chop bag. FORK OFFSET Reduced-off­set forks give the front wheel greater sta­bil­i­ty at speed and an addi­tion­al sense of steadi­ness at slow speeds too. The Mojo is designed to excel in tech­ni­cal, demand­ing ter­rain, and the 37mm-off­set gives that extra bit of con­fi­dence and con­trol in the most chal­leng­ing situations. TIRE CLEARANCE The Mojo has clear­ance for 27.5"x2.6" tires. You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter and stiffer than bear­ings and are vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance-no mat­ter how much you spend. The Mojo weighs a svelte 5.9 lbs with an inline shock, and com­plete builds start at 26.7 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT There if you want it, remov­able if you don't. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Ripley XX1
$11,499.00
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.
Ibis Ripmo XX1
$11,699.00
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And, that's exactly what we did for the Ripmo V2. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works—all day up, all day down, all day in between. TRACTION TUNE Our cus­tom-tuned front and rear sus­pen­sion fea­ture extra-light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2 is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel throughout the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 – 150mm, depend­ing on your pref­er­ence and inseam length. On Medi­um, Large, and X-Large, a 160mm—or, why not run a 185mm? Our short­er seat-tube lengths and low standovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance-free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est-grade mate­ri­als and opti­mized for the best strength, weight, stiffness, and ride per­for­mance-no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock, and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A poly­car­bon­ate down­tube pro­tec­tor deflects debris, while mold­ed rub­ber swing arm pro­tec­tors keep things qui­et and clean. And, our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
Ibis Exie XX1
$12,799.00
The Exie is a World-Cup capable cross-country race bike that flat out shreds. With a sub 2,000g frame weight and dw-link suspension, it offers a stunning combination of pedaling efficiency and downhill performance. We designed, built, and test­ed it in our Santa Cruz factory, which is pow­ered by the warm Cal­i­for­nia sunshine. BUILT BY US We build each Exie in our North­ern Cal­i­for­nia fac­to­ry. This gives us the utmost con­trol, which enable us to hit remark­able frame strength, stiff­ness, and weight tar­gets for this frame. Learn more about the process. SIZE SPECIFIC SEAT ANGLES Whether you're rac­ing short track or on a mul­ti day epic, the Exie's seat tube angles allows you to har­ness your strongest mus­cles, while reduc­ing any poten­tial knee or wrist strain. We've also steep­ened the seat tube angles as the frames get larg­er, to allow rid­ers with dif­fer­ent inseams to achieve the same rid­ing positions. DW-LINK SUSPENSION Don't squan­der a sin­gle watt. Our dw-link sus­pen­sion plat­form offers incred­i­ble climb­ing effi­cien­cy and trac­tion along with plush, down­hill-crush­ing goodness. RIDE MORE, WRENCH LESS We use bush­ings where it makes sense and bear­ings where it doesn't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. We've also added fea­tures like a thread­ed bot­tom brack­et to help make any future main­te­nance easy. INTERNAL CABLE ROUTING Inter­nal cable rout­ing doesn't have to be a pain. We've added inter­nal tubes to our tubes, no pick­sets, flash­lights, or swear words required. 2.4” TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, you're not lim­it­ed by width. 2X BOTTLE CLEARANCE The Exie has clear­ance for two water bot­tles inside the front tri­an­gle on every size frame. INTEGRATED CHAIN GUIDE Drop the ham­mer, not your chain. SEVEN YEAR WARRANTY If it's our fault, we'll fix it. Sim­ple as that.
Linus Altore 7
$599.00
The Altore is a great all around bike at an excellent price. A neutral riding position provides an ideal balance between comfort and performance. Its curved seat stays help dampen vibration while 7 speeds provide all the range you need.
Linus Altore 7
$599.00
The Altore 7 is a great all-around bike. A neutral riding position provides an ideal balance between comfort and performance. Its curved seat stay helps dampen vibration while 7 speeds provide all the range you need. Key Bike Features: - Reflective tire walls enhance visibility at night - Custom bend polished alloy handlebar - Kraton rubber grips - Ergonomic vegan leather saddle
Linus Mixte 7i
$949.00
Top of its class. Now with polished alloy fenders, a threadless headset, wrapped grips, and a laboriously perfected metallic paint you just won't get anywhere else. Key Bike Features: - Reliable 7-speed internal gears for easy shifting - Vegan leather grips with polished alloy lock-on end caps - Touring saddle - Polished alloy fenders - Custom designed rear rack
Linus Roadster 7i
$949.00
The king of the Roadsters. Now with polished alloy fenders, a threadless headset, wrapped grips, and a laboriously perfected metallic paint you just won't get anywhere else. Key Bike Features: - Custom-designed rear rack - Vegan leather grips with polished alloy lock-on end caps - Touring saddle - Alloy kickstand
Ritchey Ultra Frame
$999.99
If there's one thing Tom knows, it's dirt. When he first designed the Ultra, he knew it would appeal to riders who demand specific ride characteristics and dirt slaying only he could deliver—and that was in the 1980s! Good design withstands the test of time, and the latest iteration of the Ultra is a prime example. Like its predecessor from 30 years prior, the new Ultra occupies a unique ride space from cross-country riders looking to get rowdy and go big to enduro riders lusting for some all-mountain shredding. Designed around a 120mm travel fork and super-stable Boost 148 spacing, most of the fun is in the wheels. Designed to accommodate 29" or 27.5" wheels, the Ultra is highly versatile. Throw on some 29s for some trail-smashing XC riding or saddle up some 27.5+ for some serious no-holds-barred shredding. The Ultra is a rough and rugged trail master that doesn't know when to quit. Features: - Compatible with 27.5 x 2.8" and 29 x 2.4" tires - Material: heat-treated, triple-butted Ritchey Logic steel tubing—TIG welded - Ultra-light forged and machined tapered head tube - Optimized for 120mm (BOOST) suspension travel fork or 500mm axle-crown rigid fork - Headset: integrated—1.5" tapered - Headset upper bearing: 41.8mm OD / IS42/28.6 (S.H.I.S.) - Headset lower bearing: 52mm OD / IS52/40 (S.H.I.S.) - BOOST 148mm spacing (12mm alloy thru-axle included) - External cable routing - Replaceable stainless-steel derailleur hanger - 30.9mm seat tube with stealth dropper routing and replaceable seat collar - Front derailleur clamp size: 34.9mm (max torque setting: 2.5Nm)—not included - Bottom bracket: 73mm—English threaded - Designed for 1X or 2X chainrings (Side Swing front derailleur required for double) - BOOST cranks must be used for proper 52mm chainline - Crankset maximum ring size: 38T single—26/36T double - Recommended tire size: 27.5x2.4 (2.8 max) or 29x2.25 (2.4 max)—tire size varies by rim and tire manufacturer - Post-mount rear brake: 160mm (180mm max—adaptors available separately) - Sizes: S (15") / M (17") / L (19") / XL (20.5") - Weight: 2.57kg (L/19")
Ritchey Ascent Adventure Frameset
$1,299.00
The new Ascent is more adaptable than ever. The frame is tig-welded with heat-treated, triple-butted Ritchey Logic steel tubing that features rack and fender mounts and a third bottle mount under the downtube, while a new Ritchey steel fork offers up multi-purpose, rack, fender and dynamo light mounts. Other notable features of the new Ritchey Ascent include post-mount brake compatibility, 148mm spacing and an external seat collar. Throw a mountain bike bar on it and some 27.5" wheels for more trail-oriented adventures. Or ride it with drop bars and 29" wheels for some longer distance rough road riding. However you choose to roll, your riding possibilities are limitless atop the new Ritchey Ascent. - Includes rack and fender mounts and ability to run a mounted dynamo light - Features the new Ritchey steel fork with an 1-1/8" straight steerer - Frame: heat-treated, triple-butted Ritchey Logic steel tubing - TIG welded - 148mm spacing (12mm alloy thru-axle included) - Wheel and tire compatibility: 27.5" x 2.6" or 29" x 2.6" - Can accommodate 1X or 2X chainrings
Ritchey Swiss Cross Canti Frameset
$1,299.00
Many Ritchey-sponsored mountain bike champions were also cyclocross champions—Thomas Frischknecht, Henrik Djernis and Ruthie Matthes, to name a few. And though they were paid to race Ritchey mountain bikes, they often wanted a Ritchey cyclocross bike to race in the winter. This ultimately resulted in another iconic Ritchey model—the Swiss Cross. Now the Swiss Cross is back, and better than ever. We started with the same forged-and-machined integrated head tube design found on the P-29er—80 grams lighter than a standard 1-1/8" head tube and just as strong—a design which also provides much-needed shouldering room at the head tube. Tubing is an all-new triple-butted, heat treated steel designed to Tom's specifications for a classically lightweight, compliant, yet tough-as-nails frame. Geometry has been updated to reflect what 'cross riders want: race-ready handling and responsiveness that's still versatile enough to serve as a capable all-around rough road/trail bike. Tire clearance? Plenty. The Swiss Cross is designed with 'cross racing in mind, after all. But with two bottle cage mounts, the Swiss Cross is perfect for long mixed rides in the off-season. - Painted-to-match Ritchey WCS Cross fork and WCS integrated headset included - Bottom Bracket: 68mm English threaded - Front Derailleur Clamp: 28.6mm (Caution: Front derailleur clamp MAX torque of 2.5Nm) - Headset: WCS integrated drop-in 41.8 (included) - 130mm rear spacing - Weight: 1941g / 4.28lbs (55cm, frame only) - Sold as frameset only
Ritchey Road Logic Disc Frameset
$1,399.00
The new Ritchey Road Logic Disc delivers the same amazing ride experience that the bike is known for but adds the stopping power and control of disc brakes. Steeped with more than 40 years of frame-building heritage, innovation, exploration, and lots of riding, the classic lines of this beautiful steel frame and carbon fiber fork unite with modern building techniques and proven materials to deliver a contemporary bicycle that’s wonderfully comfortable for long days in the saddle, nimble and stiff enough to win the sprint for that sign, and adequately adaptable to endure roads that might lack proper pavement. The frame is built with a heat-treated and triple-butted proprietary Ritchey Logic tube set and features a straight headtube and aggressively short-butted sections optimized for TIG welding that save weight and improve ride quality. The tried and true specs on the frame remain unchanged but now sport a redesigned chainstay for flat-mount disc brake compatibility, thru-axles in the front and rear, and a new fork designed specifically for the Road Logic Disc. - Material: heat-treated, triple-butted Ritchey Logic steel tubing—TIG welded - Ultra-light forged and machined straight 1-1/8" headtube - WCS headset included (upper IS42/28.6 - 16mm stack height | lower IS42/30) - 142mm spacing (12mm alloy thru-axle included) - Replaceable stainless-steel derailleur hanger - 27.2mm seat tube with integrated seat collar (max torque setting: 6Nm) - Front derailleur clamp size: 28.6mm (max torque setting: 2.5Nm) - not included - Bottom bracket: 68mm - English threaded - Can accommodate 1X or 2X chainrings - Crankset min/max ring size - single: 36 to 50t / double: 46/30t to 53/39t - External cable routing - Bottle mounts: 2 - Ritchey WCS Carbon Disc Road Fork included
Ritchey Swiss Cross Frameset
$1,599.00
Possibly the most iconic frame associated with Ritchey, the Swiss Cross draws its name from early factory rider, cyclocross, and mountain bike legend Thomas Frischknecht. The first iteration of the Swiss Cross was a no-holds-barred race machine designed for one thing: ripping through dirt like no other. Captained to numerous victories under Frischi, the Swiss Cross went on to become one of the most revered frames of the Ritchey offering. Twenty-five years later, the Swiss Cross is still a staple of the Ritchey fleet—now featuring modern standards such as 12mm thru-axles, flat-mount brakes, and higher-volume tire clearance. Yet one thing has remained unchanged: it is still a no-holds-barred race-ready dirt ripper. Whether it's leading the charge on bell lap or ticking off the grueling miles of a gravel grinder, the new Swiss Cross is more than capable of tackling it all. - Material: heat-treated, triple-butted Ritchey Logic steel tubing - TIG welded - Ultra-light forged and machined straight 1-1/8" headtube - WCS headset included (IS42/28.6|IS42/30) - 142mm spacing (12mm alloy thru-axle included) - Replaceable stainless-steel derailleur hanger - 27.2mm seat tube with integrated seat collar (max torque setting: 6Nm) - Front derailleur clamp size: 28.6mm (max torque setting: 2.5Nm) - not included - Bottom bracket: 68mm - English threaded - Can accommodate 1X or 2X chainrings - Crankset min/max ring size - single: 36 to 46t / double: 46/30t to 50/34t - External cable routing - Bottle mounts: 2 - Ritchey WCS Carbon Cross Disc Fork included
Ritchey Outback V2 Frameset
$1,699.00
Tom Ritchey rides about 10,000 miles (16,000 km) per year, and most of that is off-road. Combine that with his more than 40 years of designing and building bicycles, and it’s no wonder the Outback has become an icon in the gritty world of gravel and adventure bikes. Updated for 2020, the new Outback now sports several practical and adaptable features that offer riders the ability to chase epic ride experiences beyond the end of the road and the end of the day. Rack and fender mounts help to keep things dry and expand the load-carrying capacity for longer bikepacking adventures, while clearance for 700c x 48mm or 650b x 2.0in tires opens up a whole new world of possibilities. The frame accepts flat-mount disc calipers, and the new all-carbon fiber Ritchey Adventure Fork with multi-purpose mounts on the legs gives you more places to stow the supplies you gather at the last cafe. Painstakingly TIG-welded with proprietary triple-butted Ritchey Logic steel tubing, the Outback frame delivers the legendary Ritchey ride quality that’s resilient over the harshest terrain and delightfully responsive when you want to open it up. Bikepacking, road, off-road, trail, expedition, you name it…the new Ritchey Outback is designed do it all. - Includes new Ritchey Adventure Fork with multipurpose mounts - Accepts 700c x 48mm or 650b x 2.0in tires - Features rack and fender mounts
Salsa Journeyer Flat Bar Acolyte 700c
$999.00
Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires
Salsa Journeyer Advent 700c
$1,099.00
Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires
Salsa Journeyer Apex 1x 700c
$1,799.00
Journeyer is Salsa's gateway to all-road adventures. The geometry provides comfort and confidence on any road surface. Versatile cargo carrying options extend riding range and allow for many different missions. It all comes together to create the perfect introduction to all-road riding. - 6061-T6 alloy frame - Salsa Waxwing carbon fork with mid-blade rack mounts, fender mounts, Three-Pack mounts, and internal dynamo cable routing - Flat mount brakes - Internal cable routing including stealth dropper post routing - Water, tool, and accessory mounts on frame and fork allow for longer rides - Compatible with 700c and 650b wheels and tires