Cranksets

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Bolts for attaching sprocket to the crank arm.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins

Various parts for repair and replacement on Odyssey cranks.

Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.

- SO-2995: hex-type steel crank fixing bolt set with integrated plastic dust cap

- SO-2995: hex-type steel crank fixing bolt set with integrated plastic dust cap

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Replacement crank bolt for WeThePeople's Legacy crank.

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

- Material: Heat-treated 4130 Chromoly - Splines: 8 - Diameter: 19mm - Length: 5.7/8" (150mm) - Spindle Bolts: 8x1mm (Included) - Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings

- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit Stinger and Dewlie chain guides

- Service parts for E-13 chainguides

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

- Replacement bolt for DUB cranks

- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

• Square taper interface • Only includes left crank • 175mm length

- Forged steel - 24 TPI

- Forged aluminum replacement left arm only - JIS square 2-degree spindle taper

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets - Spacers and adapters only specific bottom brackets are required and sold separately - Spindle Interface: SRAM GXP

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Crank left arm, Blaze Powerspline, 175mm, pitch black

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

Fits 19mm team & talon cranks: - Splines: 48 - Diameter 19mm - Length: 5.5" (140mm) - Spindle bolts: 3/8" X24tpi (not included) - Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks

- Forged aluminum arms with JIS square spindle taper (129mm BB sold separately) - Super Fluid Drive riveted steel rings - 50mm chainline - 1107g

• Square taper interface • Only includes left crank

- FC-TY501-2 double crankset for 7 and 8 speed drivetrains - Simpler and faster shifting than triple cranks - 46-30 gearing, ideal for gravel, adventure, commuting & light touring - 48.8mm chainline, designed for 135mm QR and 142mm thru-axle frames - Crank bolts included - Requires LL123 square taper bottom bracket

FSA JIS Square Taper eBike replacement crankarms. Note: Spindle bore orientation varies with crank arm length - 155mm arms have diamond spindle bore orientation with sides at 45° angles to the crank arm - 170 & 175mm arms have square spindle bore orientation with sides parallel to the crank arm

CAMO Spider - Made from Aluminum alloy for light weight - Includes 5 black chainring bolts

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

Various parts for repair and replacement on Odyssey cranks.

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

- 7/8SPD - Square-taper - 42-34-23T - Steel - 50mm Chainline - 974G (175mm) - Integrated Chain Guard

- 42-32-22T - Alloy Outer Chainring - Alloy Forged Cranks - Square Taper

FSA ISIS eBike replacement crankarms.

FSA eBike Crankarm set for Yamaha/Giant. - Forged AL6061/T6 crank arms - ISIS drive - Anodized black, laser graphics

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS