Cranksets

- Forged aluminum replacement left arm only - JIS square 2-degree spindle taper

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

The Descendant 6K DUB crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Forged steel - 24 TPI

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins

This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.

No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. And for all of you Dura-Ace fans out there, we've combined our extremely light power sensors with a Shimano Dura-Ace crankset to give you the most accurate and precise power meter available. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO - Independent, dual-leg power measurement - Works with ANT+ and Bluetooth devices - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available) - 52/36T chainrings

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

The Shimano Deore XT FC-M8130 Super Boost+ crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Chainring sold separately - Hollow forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance - Features 56.5mm chainline designed for Super Boost+ spacing - 181mm Q-factor - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 157 Super Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: Shimano Hollowtech II - Drivetrain Speeds: 12 - Chainring BCD: Direct Mount - BB Included: No

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

Shimano Tourney FC-A073 crankset - 7/8-Speed compatible - SG-X Steel chainrings - Square taper JIS - Fixing bolts not included - Chainguard model

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Offering all the precision and functionality of the DURA-ACE power meter, the ULTEGRA FC-R8100-P power meter comes in a more affordable package. Scientific training requires accurate measurement and user-friendliness, and the new ULTEGRA R8100 power meter has both. Its dual-sided measurement is accurate within 1.5% and zero offset calibration is a quick and easy process. Perhaps most importantly, its long battery life, easy recharge, and ANT+ and Bluetooth®LE connectivity makes using and recording your workouts easier than ever. Integrated, waterproof, and rechargeable Li-ion battery - Up to 300+ hours (TBD*) of ride time * Depending on ANT+/Bluetooth®LE settings Accurate data collection - ±1.5% (TBD*) strain gage accuracy throughout the entire calibration range * Depending on ANT+/Bluetooth®LE settings - Proprietary strain gauge Possible to start quickly - Simple zero offset calibration with switch on transmitter Active temperature compensation - Software automatically compensates for temperature changes

The Shimano Deore XT FC-M8100 crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Hollow, forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. - Features 52mm chainline designed for Boost spacing - 172mm Q-factor - Pedal Spindle: 9/16" - BB Included: No - Chainring BCD: Direct Mount - Crank Intended Use: Mountain - Drivetrain Speeds: 12 - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs - Chainring sold separately

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor

- Replacement bolt for DUB cranks

The SRAM Force AXS Crank Arm Assembly features carbon crank arms that are ready to pair with any SRAM AXS spider or integrated chainring, with or without power. - 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Carbon fiber arms with natural carbon finish - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

Explore the most challenging routes on the newest crop of versatile and fun drop-bar bikes with the SRAM Force 43/30T wide crankset. Shifting is smooth, accurate, and dependable using our proven X-Range gearing based around a tight, 13T difference between the small and big chainrings. The wider stance of the chainrings expands 2x drivetrain bike capabilities by providing clearance for fatter tires. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - Wide chainline crankset for bikes with up to 700c x 45 or 27.5 x 2.1" tire widths (43/30 chainrings only) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Requires Force Wide front derailleur - DUB bottom bracket adds durability and simplicity

Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper

The SRAM GX Eagle DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - 56.5mm chainline

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately

The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 52.0mm chainline

The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

The SRAM S350-1 crankset brings quiet simplicity thanks to SRAM 1x technology. Featuring SRAM’s X-SYNC tooth profile, the S350-1 crankset is engineered for complete chain control at a great value. Each tooth’s thickness is CNC-machined to work seamlessly with the chain’s inner and outer links. And with four available chainrings you can personalize the gear range. - Alternative to Rival 1 crankset - Compatible with 130mm, 135mm and 142mm OLD frames - SRAM 1x simplicity and control - Durable forged aluminum with integrated spider - X-Sync chainrings have alternating wide and narrow teeth for maximum chain control - Compatible with SRAM 11 and 10 speed chains - BB Included: No - Chainrings Included: Yes - Color: Black - Crank Intended Use: Road - Drivetrain Speeds: 10, 11

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

The X01 Eagle DUB crankset is designed to be tough; ready for aggressive Trail and Enduro riding. The Carbon-tuned crankset paired with DUB technology simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them. - DUB technology delivers the strongest, stiffest, lightest crankset available - All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - All-new chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC2 chainring provides significantly quieter performance, with better mud clearing and extraordinary durability

Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It’s the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. - The strongest crank in the entire Eagle ecosystem. - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options.

You have a lot of choices when choosing a crankset, and your choice says a lot about your personal style. SRAM designed the X01 Eagle crankset for riders who feel most stylish when they stand on top of the podium. This is a completely reengineered design, employing their proprietary CARBON TUNED lay-up technology. Built tough, to handle aggressive lines through rock gardens and big hits wherever you find them. The new X01 Eagle is SRAM's best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology, which features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination—and define a new measure of durability. If you’re into that kind of thing. - DUB technology delivers the strongest, stiffest, lightest crankset available - SRAM CARBON TUNED crank technology provides extreme stiffness and light weight - Chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and extraordinary durability - Chainline: 56.5mm

The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them. - DUB technology delivers the strongest, stiffest, lightest crankset available - All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - All-new chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability

The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings

Every innovation in Quarq's DZero platform represented the 10+ years of Quarq's advances in power meter technology. This same platform is now combined with XX1 Eagle DUB CARBON TUNED crankset—lightest, stiffest, and strongest to date, and X-SYNC 2 chainring—providing significantly quieter performance with better mud clearing and extraordinary durability. Ready to power every ride. - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero: automatically checks and recalibrates your power meter as you ride (no need to manually calibrate) - AxCad: no cadence magnet required - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy: within 1.5%, measuring both legs

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

- Service parts for E-13 chainguides

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

Unleash your Power with LG1 Carbon Cranks World Cup proven for years, the Q Factor, overall profile, and volume of our Gen4 cranks have been greatly reduced, while strength and fatigue life has been dramatically improved. What wizardry is this? The engineers won't say, but the graphs and race results don't lie! The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. What's in the box: Cranks w/Self-Extractor, Installation Tools, Lockring, APS Adjuster, and Crank Boots - The lightest, purpose-built carbon Enduro and Downhill crankset - Built upon race-proven World Cup DH testing and results. Ultra-compacted carbon fiber arms are meticulously bonded to e*thirteen's Connect™ Polygon interface, which creates a robust, reliable, impact-resistant spindle-arm junction - Adjustable chainline accommodates multiple rear-axle spacing configurations, meaning you can achieve either configuration by simply placing the spacers inboard or outboard of the chainring - Carbon fiber downhill crank arms and aluminum spindle w/ Quick Connect™ lockring and Adaptive Preload Adjuster (APS), compatible with Quick Connect™ dual width Guidering M - Includes crank arm protectors, crank arm, and chainring/BB removal tools - 536g (34t M ring)

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

Rise and Grind with our lightest cranks ever! We applied decades of World Cup racing experience to develop our patented design for the lightest production carbon crankset we've ever made! Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. - Lightest production crank on the market - Gen4 cranks have the spindle on the non-drive side of the crank for easier chain guide setup and drivetrain maintenance - Use a Boost chainring to fit non-Boost chainlines on this 68mm BB crank - Now includes an 8mm self-extractor, meaning the cranks can be removed with nothing more than an 8mm allen key - Carbon fiber crank arms and aluminum spindle w/ Quick Connect lockring and Adaptive Preload Adjuster (APS), compatible with all - Quick Connect guide rings - 385g (73mm w/32T UL chainring), 398g (68mm w/38T UL chainring)

The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings